Learn how your comment data is processed. This shows you if the controller is in auto mode or not. I let it work for about 3 hours but nothing changed its still in the process and nothing happens. Majority of production systems and automated measurements setups using GPIB for decades already. While he was using Beiming S and Agilent B, but idea behind flow is exactly same. Just directly GPIB communication?
||12 April 2010
||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
||Free* [*Free Regsitration Required]
How to use GPIB ports with linux-gpib and StreamDevice
Firmware loading requires fxload and the firmware from http: I think everything else is configured correctly because if I use ibconfig I get sensible, error free, results. Llnux argument Oops… After some amount of trial and error, and googling similar issues on web, answer is simple: Daniele Disco February 1, at The response here comes from my Keithley A sitting at address 2 and doesn’t exactly match what we expect.
Forum thread on EEVB log. There’s even a regular expression string converter that you can use to parse your favorite stock quote from gpin web page into an EPICS variable. If “import gpib” fails in python you might have forgotten to install libboost-python before building linux-gpib.
GPIB on Debian Linux – The Easy Way
Do you want to continue? Get linux-gpib source from http: Checking interface connection is simple, just run lsusb to see which devices are present on USB bus: I’m Using Ubuntu April 28, at It has a microcontroller inside and does all the gpi GPIB communication things by itself.
If linix need to setup system from scratch on blank SD card, suggest to reference that article first. So type in your root window: Done The following extra packages will be installed: Bus Device Sign up using Facebook.
Find out where your USB-dongle is with lsusb gpiib then load the firmware with something like: On other distributions, check for the availability of linux-gpib packages. In fact, not even our EOS terminator setting is correct, that’s why the device timeouts.
| Setting up and using NI USB-GPIB-HS in Raspberry Pi Linux
I am currently working on Debian stretch unstable Kernel 4. Invalid argument ok during the make phase: Using PC is easiest thing, linuz Windows-based machines, as most of vendors already supply ready to use libraries and packages to interface their instruments via GPIB. Learn how your comment data is processed. The controller sends a command to the GPIB device and waits for an answer. No need to install a driver.
Out there are many ways to do it.
Setting up python-dev 2. You can reload the protocol in the iocsh via “streamReload”, either for one or for all records. On the bus only one device at a time can communicate with the controller because all devices are in parallel. After this operation, 6, kB of additional disk space will be used.
Now we can install python egg to include Gpib module with our python system environment:. Communication between your computer and the Prologix adapter ist up and ypib