Unusual multiple monitor combinations may create an expanded Windows desktop that is not recognized by the default video resolutions built into the EloVA program. The Tone slider allows you to adjust the tone of the internal beeper. When the Setup Complete screen appears, you may choose to run calibration the Elo Video Alignment program, EloVa immediately or wait until later. Drivers for both bit and bit versions of these operating systems are included in the driver package and is automatically selected based on OS type. Run the self-extracting zip file to unzip the files, using the Run EloSetup option. If you are using multiple monitors the calibration program will run on each individual monitor. Use this tab to configure the sound characteristics of the beeper similar to the “Sound” tab in the main page.
||10 January 2013
||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
||Free* [*Free Regsitration Required]
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions.
The EloVA icon will launch the video alignment program only for the monitor associated with the current Eko tab. Interested in Apd Products from Elo?
Review and accept the License Agreement. If a serial port is reserved for a touch screen controller that is not currently installed, the only Screen information displayed will be the number of the Windows COM port.
In some cases, the installer will automatically detect this need and prompt for a reboot. The driver package includes utilities which allow users to customize the operation of their touch-screen in various ways. Sends a mouse up message at the point of untouch. Unplug the AC power cord and replug the cord after approximately ten seconds. The enhanced, point calibration data cannot be stored in the touch monitor.
The size of the wire-frame square displayed in the Double click area tab is the actual size of double-click area accepted by Windows. Mouse Emulation Drag and Double-click. The Use Default Calibration button allows you to reset the calibration back to the original driver default mode.
Double-click the file on the desktop. Adjusts the tone of the touch beep. Contact Elo Applications Engineering for availability and details on how to use this file. For example, you can have three touch-screen connected in any of the following ways:. You will then be asked to touch various points on the screen to verify that the cursor appears at the position touched. This is your last opportunity to contropler your COM port selection before the driver files are installed.
No Screen configuration buttons will be displayed in this case. APR technology is indicated by —A in the model number: Installation progress screen will appear as shown.
Press the Esc key on the keyboard to terminate or skip calibration for any monitor, or you can also allow the program to time out as indicated by the progress bar. Click the Save button.
This user manual describes the installation of the touch-screen driver software and the user selectable features of each screen. Screen calibration will start. In other cases you may need to use this option to force the installation to reboot during serial elp install.
EloTouch Solutions | Support
Touch conttroller with pre-calibration data can be transferred to a different computer without the need to recalibrated on the other computer. A number will be assigned to each Properties page that is related to the order in which controllers or ports are detected or enumerated.
Interested in Custom Products from Elo? If the user touches the screen and continues to touch, a right click is generated on the screen as long as the user remains within the Right click area and after the Right click delay time-out has occurred.
More information in the “Mouse Emulation Drag and Double-click ” section below.
Elo TouchSystems: Acoustic Pulse Recognition (APR)
Follow the instructions as indicated on the Align screen. This section will explain the most common ways that the driver is installed. Select desired options in the Advanced Panel. Use this tab to configure the sound characteristics of the beeper similar to the “Sound” tab in the main page.